$425.00
The West Coast Fiero 9-3/4″ Vented Brake Kit greatly improves the braking and cooling power of your Fiero. By shortening the stopping distance and eliminating heat build up and glazing, you’ll see the performance differences on the track and street. The stock Fiero rotors are solid and depend on radiated heat loss, which increases fade and stopping distances.
The rear vented rotors for the Fiero are NOT available at this time for the stock Fiero caliper.
Increasing the size of the master cylinder is NOT recommended for this application.
We need the Brake bracket and calipers as we are running out of brake brackets, calipers for core charge to our vender.
Minimum wheel diameter of 13″
Re-machined front Fiero Hubs
These hubs are required to mount the new Z-24 9-3/4″ vented front rotors to the Fiero front spindle. The rotors are now separate from the hub assembly and be easily replaced without again removing the front hubs. This upgrade will increase the track width of the front of your Fiero by 3/8″ total.
Heavy Duty Z-34 Calipers
These 2-1/8″ piston calipers are similar to those used on the Z-24. Stock brake lines will work with this upgrade, however, steel braided brake lines are recommended for a better brake pedal feel.
** We offer performance Brake Pads for these calipers **
Caliper Mounting Adapters
These custom modified Fiero front adapters couple the new calipers to the existing Fiero suspension. Stock Fiero hardware is used for mounting these adapters. With our Fiero adapters, no grinding or modification to the Caliper is necessary, easily facilitating any future replacements.
